The surface to be painted should be dry and clean, free of dust, dirt, and oil. Small holes or fine cracks should be fixed first before painting. Protect parts that do not want to be painted with duct tape, paper or adhesive tape. Barriers between walls and floors, windows and frames, windows should normally be covered so as not to get stained with paint. When finished, immediately remove the adhesive tape before the paint is drying the paint so that the paint is not removed. However, if you want to hire the professionals instead, just go to http://www.onemanandabrush.com and call the trusted painting service near you.
For surface preparation, there are two things to note from this first step.
a. New surface:
For perfect results, leave the new wall completely dry.
b. Long surface:
If the stickiness and old paint conditions are still good, the surface of the wall can be directly painted. For best results, paint the paint peel clean and surface sandpaper until smooth.
Before starting with the wall paint, use a base paint containing acrylic emulsion paint material that has resistance to alkali salts and efflorescence.
How to use
Stir well before use. In the dilution section 20% for the first layer and 10% for the next layer. Use clean water for dilution.
Wear eye protection during sanding and painting. Make sure there is adequate ventilation during painting and drying. If insufficient ventilation, wear suitable respiratory protective equipment. When exposed to skin, wash immediately with soap and water.